Inheriting portal engine page content

Inheritance allows you to maintain a consistent design throughout the website and manage content shared by multiple pages in a single location. Portal engine pages can use two different types of content inheritance:

  • Page nesting inside ancestor pages
  • Inheriting the entire page template from the parent page (shared templates)

Using page nesting

Nested pages display their own content inside other pages. You can nest pages within ancestor pages in the content tree.

What are ancestor pages?

Ancestors include all pages under which a given page is stored, from the root of the site’s content tree down to the page’s direct parent.

For example, the /Company/Offices/London Office page has the following ancestors:

  • Website root page
  • /Company
  • /Company/Offices

Nesting allows you to organize your website’s content tree in the following way:

  • Pages that provide shared content on the upper levels
  • Individual content pages stored as subpages

Creating pages that support nesting

Note: The following steps are required for all pages serving as master pages, but you can also set up nesting for any other pages.

To allow subpages to nest within a page:

  1. Open the Pages application.
  2. Select the page in the content tree.
  3. Open the Design tab.
  4. Add the Page placeholder web part.

The page placeholder specifies the position of nested pages within the content. When displaying the nested pages, the system loads everything around the page placeholder as fixed content.

Page placeholder web part located on a website’s master page template

Setting default content for page placeholders

By default, the placeholder does not display anything on the page where it is placed. You can configure the placeholder to show one of the website’s re-usable page templates as default content:

  1. Configure the page placeholder web part (double-click).
  2. Select a template in the Default page template property.
  3. Click OK.

The page displays the selected template inside the area occupied by the page placeholder. Nested pages ignore the placeholder’s default template and display their own content instead.

The Use template on all subpages and Page to display properties force the placeholder to always display the default template or a specific page. Such placeholders cannot be used for standard page nesting — all nested subpages display the specified content instead of their own.

Configuring pages to nest within ancestors

Tip: You can use page nesting on any number of levels. Nested pages can also contain their own page placeholders for displaying subpages.

  1. Open the Pages application.

  2. Select the subpage page in the content tree.

  3. Open the Properties -> Template tab.

  4. Choose one of the following Page nesting options for the page:

    Page nesting type

    Description

    Use page template settings

    The page nesting settings are determined by the configuration of the page’s template. This option allows you to manage the settings for pages with shared templates.

    To modify the page template’s nesting settings:

    1. Click **Edit template properties**.2. Set the **Page nesting** options on the **General** tab.3. Click **Save**.

    None

    The page behaves as a standalone page without any nesting.

    Only the nearest master page

    The page nests only within the website’s master page. If your website uses multiple master pages, the page nests within the closest master page in the content tree hierarchy.

    Specific ancestor pages

    Allows you to enable or disable nesting within any ancestor pages (regardless of the master page structure). Specific pages are represented by the checkboxes below.

    Configuring page nesting on the page level

  5. Click Save.

When visitors view the nested page, the system loads the content of the selected ancestors and displays it around the content of the page itself (according to the positions of the page placeholder web parts).

On the Design tab of nested pages, the editable template section appears inside the content of ancestor pages (in the position of the page placeholder on the previous nesting level). You can edit the page layout and web parts of the nested page’s template as usual. You cannot modify the content from the ancestors where the page is nested.

Editing a nested page on the Design tab

Important

You can only edit the page template on the Design tab if all pages where the given page is nested contain a Page placeholder.

If you configure a subpage to “nest” inside a page without a page placeholder, the subpage only displays the content of the given ancestor and cannot be modified in any way.

Inheriting page header content for nested pages

You can add custom <head> content to pages, such as links to external CSS or JavaScript files.

  1. In the Pages application, open the page’s Properties -> Template tab.
  2. Click Edit template properties.
  3. Switch to the Header tab.
  4. Type in the required content.
  5. Click Save.

The system inserts the content into the <head> element in the output code of all pages that use the given template.

Note: Custom <head> content is only rendered on pages whose page type has the Behaves as Page (menu item) type property enabled.

Nested pages can inherit the header content from their ancestors. The inheritance depends on the following options, which you can enable or disable on the Header tab of each page template:

  • Allow descendant templates to inherit the header
  • Inherit headers from the templates of ancestor pages

The header inheritance follows the page nesting settings – pages can only inherit head content from the ancestor pages where they are nested. Pages that do not use nesting cannot inherit head content.

Inheriting the page template of the parent page

One way to display content from parent pages is to inherit the entire page template. Pages with an inherited template are mostly identical to the parent, but you can modify them in the following ways:

  • Set different content inside the page’s editable web parts (Editable text and Editable image)
  • Use web parts that display different content based on the page’s type and location in the content tree (path)
  • Hide web parts on subpages
  • Add web parts that appear only on particular page types

A typical scenario where you can use page template inheritance is a parent page of the Page (menu item) type with multiple child pages that aren’t set to behave as Page (menu item) types. By inheriting the template, users can create the child pages without worrying about the page design. You can use one of the page viewer web parts to dynamically display a list of these child pages on the parent page. Each child page then displays specific detailed information when viewed.

You can create new pages with an inherited template by choosing the Use parent page template option in the template selection dialog. Page types that aren’t set to behave as Page (menu item) types automatically inherit the template of the parent page by default.

To configure an existing page to inherit the parent page’s template:

  1. In the Pages application, select the page in the content tree.
  2. Open the Properties -> Template tab.
  3. Select Inherit from parent in the Template section.
  4. Click Save.

The child page uses the same page template as the parent. Any changes that you make to the page template’s layout or web part configuration affect both the parent page and all pages that inherit the template.

Tip: The page template inheritance can continue throughout the content tree — pages may inherit from parent pages that already use an inherited template (Parent -> Child -> Descendants…).

Hiding web parts on subpages

You can disable content inheritance for individual instances of web parts. This allows you to add web parts to pages without affecting the design of subpages that inherit content. Applies to both types of content inheritance — page nesting and pages with inherited templates.

  1. In the Pages application, open the Design tab of the page containing the web part.
  2. Configure the web part (double-click).
  3. Expand the Visibility property category.
  4. Select the Hide on subpages checkbox.
  5. Click Save & Close.

Users now cannot see the web part on sub-pages in the content tree.

Example

You can find an example on the News page on the sample Corporate site. The page hides the Header text, Description text, News filter and Universal pager web parts on child pages. As a result, the text sections are only visible on the list of news items — not on the detail pages of individual news items, which inherit the page template from the parent News page.

Making web parts visible only for specific page types

You can configure web part instances to appear only on specific types of pages. This allows you to set up different content inheritance for different page types (applies to both page nesting and pages with inherited templates). You can also use this feature for pages that simply share page templates, without any kind of inheritance.

  1. In the Pages application, open the Design tab of the page containing the web part.
  2. Configure the web part (double-click).
  3. Expand the Visibility property category.
  4. Click Select next to the Show for page types property.
  5. Choose the allowed page types and click Select.
  6. Click Save & Close.

The web part is now only visible when viewing pages of the selected types.

Example

You can find an example on the /Community/Blogs/Andrew-Jones-Blog page on the sample Corporate site. The page displays the Header text, Description text and Blogs filter web parts only on CMS.Blog and CMS.BlogMonth pages. The web parts are hidden when viewing individual CMS.BlogPost pages, which inherit the template.

Sample inheritance scenario

The following example shows how the system processes a request for a nested product page: /Products/Notebooks/Dell-XPS-15z

This sample scenario demonstrates content inheritance through both page nesting (Page placeholder web parts) and page template sharing. The portal engine loads the templates in the following order:

1. / (root)

Website master template

2. /Products

Products page template

3. /Products/Notebooks

Laptops page template

4. /Products/Notebooks/Dell-XPS-15z

Laptops page template - inherits the page template from the parent page.

Note

A page viewer web part (e.g. Repeater) automatically displays the detail of the selected product instead of the product list.

See Loading and displaying data on websites for more information.